WHY WOULD USE TANZANITE GEMSTONE
THE DIAMOND TESTER Diamond has a much higher thermal conductivity than any of its stimulants, and the tester uses this property to identify both mounted and unmounted stones. The instrument is particularly suited to testing small stones that are recessed in their mount. Consists of: Handheld probe that is fitted with a miniature heating sensor. A control box containing the associated electronic sampling and indicating circuits. Procedure: Short pulses of heat are fed to the probe’s silver test tip. The electronic circuits measure the rate at which this is conducted away into the gemstone under test. A high rate of heat transference will cause the green light to flash indicating that the stone being tested is a diamond. A low rate of heat transference will cause the red light to flash indicating that the stone is probably not a diamond. Do’s: Always check the tester against the test plate supplied or a known diamond before using it. Always allow the rings to cool before testing th...